Epoxy repair mortar Scope: ★ fire-resistant, high temperature, suitable for concrete structures, cellular surface, vulnerabilities and flaws exposed tendons and other processing. ★ concrete structures, stair stepping corrupted patch. ★ sticky steel reinforcement and sticky carbon fiber reinforced bottom when done leveling. ★ can be used as water, saline areas and chemical plants and other corrosive environments corrosion-resistant materials. Product Features: ★ with impermeability, frost, salt, alkali resistance, weak acid corrosion resistance, is pasted acid brick, granite, marble and mud dedicated ★ variety of materials with strong adhesive force. ★ thermal expansion coefficient close to the concrete, it is difficult to disengage from these substrates to be bonded and durability. ★ construction in the wet surface of the substrate, without drying, can harden in wet conditions or underwater. ★ non-flammable, non-explosive, do not pollute the environment, harmless to human health. ★ low cost, only 30-50% of epoxy resin mortar. ★ construction convenient operation, with ordinary cement mortar construction, easy to clean, it can be cleaned with water. Physical performance indicators: Test items Performance test results flexural strength (Mpa) 28d 6.0 6.49 Compressive Strength (Mpa) 7d - ≥25 28d> 20 ≥35 neutral resistance (mm) 28d <5.0 1.8 Bond Strength (Mpa) at room temperature normal 28d> 1.0 2.8 thermal cycling 28d> 1.0 2.4 permeable amount (g) <20 15 24h water absorption (g / m3) <1000 525 absorption coefficient (kg / cm2? h0.5) <0.5 0.32 Use Method: 1. Check the product packaging intact, check the label is correct. 2, open the lid, the pre-dosing bucket 3 bags marked A, B, C are removed. 3. A material, B material after shaking, were poured into the bucket and stir evenly, then marked with a "C" for stirring the powder into the barrel slowly, stirring into a uniform mortar like you can. If more viscous or difficult to stir, this package can be added to 1-2kg of clean water and stir, does not affect the final performance of the product mixture. Note: This product is cement-based material, which is completely curing time required 28 days. FDA A24 hours to the next process. Marinated epoxy mortar should be used up within two hours, during this time, such as thickening of the situation appears to dry you can add the appropriate water and stir well before using. Packaging and storage: ★ The product packaging specifications 20kg / barrel. ★ unopened shelf life of 12 months, may continue to be used after passing beyond the shelf life is subject to inspection. ★ This product is non-toxic, odorless, non-flammable, non-explosive, in line with environmental protection requirements, according to general cargo storage and transportation.